AR Sandblast SL kit

Product Code: AR40813
Availability: Factory-Direct
Price: $106.00

Images are for illustrative purposes only - the actual products may differ.

+ FREE GROUND SHIPPING On all pressure washers
+ TAX-FREE All states
+ Authorized dealer All items are covered by manufacturer's warranty
Sandblasting Lance kit AR40813 is used to remove paint, rust and cement from metallic and stone surfaces. Uses a combination of high pressure water and sand. The Sandblast SL kit is designed for sandblasting various surfaces. It will remove most coatings down to white metal, erase grafitti and the rust that builds up over time from a well water system. It's also the perfect tool for paint surface preparation. You can experiment with the various pressures on your machine and the grade of sand to determine which will give the best results * Carbide tip * Maximum Flow: GPM * Maximum Pressure: PSI * Maximum Temperature: Degrees F. * 24" Wand * 25 feet of polybraid hoseGeneral Instructions: Run the sand suction hose on top of the lance. If sand suction hose is under the lance during operation water can run down the sand suction hose getting the sand wet and it will not flow through the head. Eventually the hose will plug and the assembly will need to be cleaned and dried before using. Several pieces of electrical tape can be used to hold the hose in place. Silica sand is recommended and can be purchased separately. Compatible with pressure washers models AR112, AR118, AR141, AR240 & AR383
No reviews
Write a review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products